How to Reset Windows 10 in iBall Compbook i360 v3.0

iBall CompBook i360 v3.0 is a Windows 10 base laptop with a 11.60-inch screen that has a resolution of 1366×768 pixels. It is has a Intel Core i3 processor and it has 2GB of RAM. The iBall CompBook i360 v3.0 packs 32GB of Hard Drive. If your computer is not working properly,  giving you errors again and again or performing extremely slowly. Due to these reason you want to reset your iBall Compbook Windows 10 or factory reset. In this article we will try to explain how to reset Windows 10 in iBall Compbook i360 v3.0

let’s start to explore  How To Reset Windows 10 in iBall Compbook i360 v3.0, first of all, we should have to take some important step before reinstalling windows in iBall Compbook.

Bootable pen drive making Process

Firmware file is zipped; we need to unzip the OS file first. (As shown below)

Copy all the content from the OS folder.

Paste all content in the pen drive which we formatted in FAT32 and renamed to WINPE.

Switch off Compbook & Connect Charger to the Compbook

Connect the Pen drive to the CompBook to any USB slot.

Power On the device and press F7 key until you get the boot menu, once you get the
boot menu you have to select Pen drive which you have connected in the list and hit
enter, i.e. like here we can see the connected pen drive is SanDisk.

Once you press enter automatically the process starts you don’t have to do anything
till then, you will see one dos window with process going on.

Once installation process complete, it will stop on command prompt like below
image 1. Type “Exit” and press enter to restart like below image 2. After pressing
enter immediately remove Pen drive from CompBook.

Once this process is done the device will restart and windows 10 installation starts
up with “iBall Open Up” Logo.

Once the Windows 10 Installation is complete the device will restart and starts up
to desktop

Here the desktop will have window popped up saying “System Preparation tool”.

Here you just need to press Ok and it will restart the Device No need to select
any option

Then the device will restart and will take some time for setting up, once done it
will show you this screen.