iBall CompBook M500 is a Windows 10 base laptop with a 14-inch screen that has a resolution of 1920×1080 pixels. It is has a Intel Celeron Dual Core N3350 processor and it has 4GB of DDR3 RAM. The iBall CompBook M500 packs 32 GB of SSD ( Solid State Drive ). If your computer is not working properly, giving you errors again and again or performing extremely slowly. Due to these reason you want to reset your iBall Compbook Windows 10 or factory reset. In this article we will try to explain how to reset windows 10 in iBall Compbook M500.
let’s start to explore How To Reset Windows 10 in iBall Compbook M500, first of all, we should have to take some important step before reinstalling windows in iBall Compbook.
- you should have 16 GB Minimum Pen drive formatted in FAT32 and renamed to “WINPE”
- Minimum 80% Battery Charge in CompBook M500
- Download iBall CompBook M500 Windows 10 Firmware
You Can Download iBall Compbook Aer3 Windows Firmware from Given Links
Bootable pen drive making Process
Firmware file is compressed; we need to uncompress the OS file first. (As shown below)
Copy all the files and Folder from the OS (As shown below)
Paste all the Files And Folder,s in the pen drive which we formatted in FAT32 and renamed to WINPE. (As shown below)
Switch off your iBall Compbook M500 laptop
Connect the Pen drive to the iBall CompBook M500 to any USB slot.
Power On the laptop and press F7 key until you get the boot menu, once you get the boot menu you have to Choose Pen drive which you have connected in the list and hit enter, (As shown below)
Once you press enter automatically the process starts you don’t have to do anything till then, you will see one window with process going on. (As shown below)
Once installation process complete, it will stop on command prompt like below
Type “Exit” and press enter to restart. After pressing enter immediately remove Pen drive from Slide.
Once this process is done the laptop will restart and windows 10 installation starts up with “iBall Open Up” Logo. (As shown below)
Once the Windows 10 Installation is complete the laptop will restart and starts up to desktop
Here the desktop will have window popped up saying “System Preparation tool”.
Here you just need to press Ok and it will restart the Device No need to select any option (As shown below)
Then the laptop will restart and will take some time for setting up, once done it will show you this